Backup Lamps Always On

Step	Action	Yes	No
Schematic Reference: Exterior Lights Schematics
1	Did you review the Lighting System Description and Operation and perform the necessary inspections?	Go to Step 2	Go to Symptoms - Lighting Systems
2	Verify that the backup lamps are always on. Does the system operate normally?	Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems	Go to Step 3
3	Turn ON the ignition, with the engine OFF. Disconnect the Park/Neutral position switch or the Backup lamp switch. Are the backup lamps still illuminated?	Go to Step 4	Go to Step 5
4	Find and repair the short to voltage in the backup lamp feed circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair?	Go to Step 6	-
5	Replace the Park/Neutral position switch or the Backup lamp switch. Refer to Park/Neutral Position Switch orBackup Lamp Switch Replacement in Transmission/transaxle. Did you complete the repair?	Go to Step 6	-
6	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 3