Shock Module Replacement

Fig 1: Shock Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove the tires and wheels. Refer to Tire and Wheel Removal and Installation . Remove the toe links. Refer to Toe Link Replacement .
1	Nuts, Upper Shock Module Mounting (Qty: 2) Tighten: 47 N.m (35 lb ft)
2	Nuts, Lower Shock Module Mounting (Qty: 2) Tighten: 28 N.m (21 lb ft)
3	Bolts, Lower Shock Module Mounting
4	Module, Shock Tip: Remove the shock module toward the rear of the vehicle.