LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> G6 GT >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Pad Replacement - Instrument Panel (I/P) >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel (I/P) upper trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Upper .
  2. Remove the I/P outer trim covers. Refer to Instrument Panel (I/P) Outer Trim Cover Replacement .
  3. Remove the I/P compartment. Refer to Compartment Replacement - Instrument Panel (I/P) .
  4. Remove the knee bolster. Refer to Knee Bolster Replacement .
  5. Remove the cluster trim bezel assembly. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster .
  6. Remove the cluster. Refer to Instrument Panel Cluster (IPC) Replacement .
  7. Remove the I/P center trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center .
  8. Remove the HVAC control module. Refer to HVAC Control Module Replacement in Heating, Ventilation, and Air Conditioning.
  9. Remove the radio. Refer to Radio Replacement in Entertainment.
  10. Remove the ignition switch wire harness connectors. Refer to Ignition Switch Replacement .
  11. Remove the park lock cable at the ignition switch. Refer to Park Lock Cable Replacement in Automatic Transaxle - 4T40-E/4T45-E.
  12. Remove the accessory switch assembly. Refer to Accessory Switch Replacement .
    13. Fig 1: View Of I/P Trim Pad Screws
    GM1207591Courtesy of GENERAL MOTORS CORP.
  13. Remove the I/P trim pad screws.
    14. Fig 2: View Of I/P Pad
    GM1207564Courtesy of GENERAL MOTORS CORP.
  14. Remove the I/P pad.
  15. Remove the ignition switch from the I/P pad. Refer to Ignition Switch Replacement .
scientia non olet · About LEMON Manuals