LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Vibe GT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical - 1.8L (LV6)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Oil Pump Installation

Oil Pump Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Oil Pump And Gasket
    GM236064Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Engage the spline teeth of the oil pump drive rotor with the large teeth of the crankshaft.
  1. Install the oil pump. Use a new oil pump gasket.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Use the 5 oil pump bolts in order to secure the oil pump.

    Tighten:  Tighten the oil pump bolts to 9 N.m (80 lb in).

scientia non olet · About LEMON Manuals