LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Vibe GT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical - 1.8L (LV6)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Exhaust Camshaft and Lifter Removal >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Using Wrench To Hold/Rotate Camshaft
    GM625497Courtesy of GENERAL MOTORS CORP.
  1. Remove the exhaust camshaft sprocket bolt.
    2. Fig 2: View Of Sprocket Locating Pins
    GM625493Courtesy of GENERAL MOTORS CORP.
  2. Remove the camshaft sprocket.
    3. Fig 3: Exhaust Camshaft Bearing Cap Bolts
    GM427004Courtesy of GENERAL MOTORS CORP.
  3. Remove the exhaust camshaft bearing cap bolts in sequence. Starting at the ends and working toward the center of the camshaft.
  4. Remove the front camshaft bearing cap (5).
  5. Remove the exhaust camshaft from the cylinder head.
scientia non olet · About LEMON Manuals