LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Vibe GT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical - 1.8L (LV6)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Crankshaft Pulley Removal

Crankshaft Pulley Removal

WARNING: This page is about a different variant/trim than selected.

Tools Required 

J 8614-01  Pinion Flange Holder

    Fig 1: Pinion Flange Holder
    GM234153Courtesy of GENERAL MOTORS CORP.
  1. Remove the crankshaft pulley retaining bolt using J 8614-01  to prevent crankshaft rotation when loosening the bolt.
  2. Remove the crankshaft pulley.
scientia non olet · About LEMON Manuals