Rear Seat Back Cushion Replacement (Bucket)

Rear Seat Back Cushion Replacement (Bucket)

Removal Procedure

1. Remove the rear bucket seat. Refer to Rear Bucket Seat Replacement (Rear Bucket Seat Replacement).
2. Remove the outer trim panel from the rear seat cushion. Refer to Rear Seat Cushion Outer Trim Panel Replacement (Bucket) (Rear Seat Cushion Outer Trim Panel Replacement (Bucket))Rear Seat Cushion Outer Trim Panel Replacement (Split Bench) (Rear Seat Cushion Outer Trim Panel Replacement (Split Bench)).
3. Remove the inner trim panel from the rear seat cushion. Refer to Seat Cushion Inner Trim Panel Replacement (Front Bucket) (Seat Cushion Inner Trim Panel Replacement (Front Bucket))Seat Cushion Inner Trim Panel Replacement (Rear Bucket) (Seat Cushion Inner Trim Panel Replacement (Rear Bucket)).




4. Remove the bolts from the seat back recliner hinges.




5. Remove the seat back from the seat cushion.

Installation Procedure




1. Place the rear seat back to the rear seat cushion frame.

Notice: Refer to Fastener Notice in Cautions and Notices.




2. Install the bolts to the seat back recliner hinges.

Tighten the bolts to 40 Nm (30 lb ft).

3. Install the outer trim panel to the rear seat cushion. Refer to Rear Seat Cushion Outer Trim Panel Replacement (Bucket) (Rear Seat Cushion Outer Trim Panel Replacement (Bucket))Rear Seat Cushion Outer Trim Panel Replacement (Split Bench) (Rear Seat Cushion Outer Trim Panel Replacement (Split Bench)).
4. Install the inner trim panel to the rear seat cushion. Refer to Seat Cushion Inner Trim Panel Replacement (Front Bucket) (Seat Cushion Inner Trim Panel Replacement (Front Bucket))Seat Cushion Inner Trim Panel Replacement (Rear Bucket) (Seat Cushion Inner Trim Panel Replacement (Rear Bucket)).
5. Inspect the seat back for proper operation.
6. Install the rear bucket seat. Refer to Rear Bucket Seat Replacement (Rear Bucket Seat Replacement).