LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1999 >> Breeze 2.4 X >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag Restraint Systems - Except Coupe >> Diagnostic Tests >> Test VER-1A - Verification Test

Test VER-1A - Verification Test

  1. Remove all jumper wires. Reconnect all previously disconnected components (except battery). Turn ignition on and reconnect battery. Connect DRB to data link connector. Using DRB, erase stored codes.
  2. Turn ignition off and wait 15 seconds before turning ignition on. Wait one minute. Read active codes. If DRB displays any active codes, perform TEST 1A - IDENTIFYING SYSTEM PROBLEMS  . If DRB does not display any active codes, go to next step.
  3. Using DRB, read stored codes. If DRB displays stored codes, perform TEST 1A - IDENTIFYING SYSTEM PROBLEMS  . If DRB does not display any stored codes, system is operating properly at this time.
scientia non olet · About LEMON Manuals