LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1999 >> Intrigue GL, 3.5 H >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Instrument Panel - Analog) >> Symptom Tests >> Seat Belt Indicator Not Operating Properly

Seat Belt Indicator Not Operating Properly

WARNING: This page is about a different car, the 1999 Pontiac Grand Am and 1999 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform INSTRUMENT PANEL CLUSTER SYSTEM CHECK  under SYSTEM TESTS. Go to next step.
  2. Connect scan tool to DLC and turn ignition on. Select Instrument Panel Cluster (IPC) special functions LAMP TEST on scan tool. Command indicators on and off. If seat belt indicator turns on and off when commanded, go to FASTEN SEAT BELT CHIME ALWAYS ON  . If seat belt indicator does not turn on and off when commanded, go to next step.
  3. Replace instrument panel cluster. See INSTRUMENT PANEL CLUSTER (IPC)  under REMOVAL & INSTALLATION. After repairs, go to INSTRUMENT PANEL CLUSTER SYSTEM CHECK  under SYSTEM TESTS.
scientia non olet · About LEMON Manuals