Strut Assembly: Reassembly
WARNING: This page is about a different car, the 1997 Pontiac Grand Am, 1997 Oldsmobile Cutlass, 1997 Oldsmobile Achieva, 1997 Chevrolet Malibu, and 1997 Buick Skylark. However, it is still accessible from the selected car via links, so may be relevant.
To reassemble, reverse disassembly procedure. Ensure flat on upper spring seat faces strut mounting flange. See Figure. Ensure bearing is installed into recess of upper spring seat before fully assembling. Tighten strut rod nut. See TORQUE SPECIFICATIONS table.