Component Inspection
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK INTAKE AIR TEMPERATURE SENSOR
- Turn ignition switch OFF.
- Disconnect mass air flow sensor harness connector.
- Check resistance between mass air flow sensor terminals as per the following.
Mass air flow sensor
Condition
Resistance (kΩ)
+
-
Terminals
4
2
Temperature [°C (°F)]
25 (77)
1.800 - 2.200
Is the inspection result normal?
YES
INSPECTION END
NO
Replace mass air flow sensor. Refer to Removal and Installation .