Component Inspection

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK ENGINE COOLANT TEMPERATURE SENSOR

Turn ignition switch OFF.
Disconnect engine coolant temperature sensor harness connector.
Remove engine coolant temperature sensor. Refer to Exploded View .

Check resistance between engine coolant temperature sensor terminals as per the following.

Courtesy of NISSAN NORTH AMERICA, INC.

ECT sensor		Condition		Resistance (kΩ)
+	-
Terminal
1	2	Temperature [°C (°F)]	20 (68)	2.37 - 2.63
			50 (122)	0.68 - 1.00
			90 (194)	0.236 - 0.260

Is the inspection result normal?

YES

INSPECTION END

Replace engine coolant temperature sensor. Refer to Exploded View .