LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Engine Control System (DTC/Circuit Diagnosis) (5 Of 5)) >> DTC/Circuit Diagnosis >> Fuel Injector >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUEL INJECTOR 
    1. Turn ignition switch OFF.
    2. Disconnect fuel injector harness connector.
    3. Check resistance between fuel injector terminals as per the following.
      G04074407Courtesy of NISSAN NORTH AMERICA, INC.

      Terminals

      Resistance

      1 and 2

      11.1 - 14.5 Ω [at 10 - 60°C (50 - 140°F)]

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace malfunctioning fuel injector. Refer to Removal and Installation .