LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Power Supply, Ground & Circuit Elements) >> Removal And Installation >> Battery Tray >> Removal and Installation (Battery Tray) >> Removal

Removal and Installation (Battery Tray): Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove battery and battery tray liner. Refer to Removal and Installation (Battery) .
  2. Remove air cleaner assembly. Refer to Removal and Installation .
  3. Disconnect the ECM and TCM harness connectors.
  4. Remove the nuts and harness clips and remove the ECM, TCM and bracket.
  5. Remove engine room harness clips from the battery tray.
  6. Remove bolts and remove the battery tray.
scientia non olet · About LEMON Manuals