DTC Confirmation Procedure
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM SELF DIAGNOSTIC RESULT
- Turn ignition switch ON, and wait for more than 1 second.
- Perform "Self Diagnostic Result" of "BCM" using CONSULT.
Is DTC B2615 detected?
YES
Refer to Diagnosis Procedure .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: Inspection End.Blowe