LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Engine Mechanical) >> Removal And Installation >> Oil Pan And Oil Strainer >> Removal and Installation (Lower Oil Pan) >> Installation

Removal and Installation (Lower Oil Pan): Installation

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply a continuous bead of liquid gasket to the lower oil pan groove (A) and bolt hole (B) as shown, below.
    GNSJPBIA0010Z-010Courtesy of NISSAN NORTH AMERICA, INC.
    • Use Genuine Silicone RTV Sealant, or equivalent. Refer to Recommended Chemical Products and Sealants .
    • Be sure the liquid gasket is 4.5 - 5.5 mm (0.177 - 0.217 in) wide.
    • Installation must be done within 5 minutes after applying liquid gasket.
  2. Install the lower oil pan. Tighten the lower oil pan bolts in order as shown, below.
    Fig 1: Lower Oil Pan Bolt Tightening Sequence
    GNSAWBIA1357Z-357Courtesy of NISSAN NORTH AMERICA, INC.
    • Wait at least 30 minutes before refilling the engine with oil.
scientia non olet · About LEMON Manuals