Removal and Installation: Installation

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal. Follow the procedure below for specific tightening sequences and procedures.

CAUTION: Do not reuse intake manifold gaskets.

Install intake manifold nuts and bolts in two steps in the numerical order as shown, below.

Courtesy of NISSAN NORTH AMERICA, INC.

Step 1	: 7.4 N.m (0.75 kg-m, 65 in-lb)
Step 2	: 25.5 N.m (2.6 kg-m, 19 ft-lb)