Inspection After Installation

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Check For Fuel Leaks

Turn ignition switch "ON" with the engine stopped. With fuel pressure applied to fuel piping, check for fuel leaks at connection points. Repair as necessary.
NOTE: Use mirrors for checking at points out of clear sight.
Start the engine. With engine speed increased, check again for fuel leaks at connection points. Repair as necessary.
CAUTION: Do not touch the engine immediately after stopped, as the engine becomes extremely hot.