LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Engine Mechanical) >> Removal And Installation >> Air Cleaner And Air Duct >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front air duct.
  2. Disconnect the breather hose.
  3. Disconnect the hose from the upper intake manifold.
  4. Disconnect the electric throttle control actuator tube clamp and the air duct hose and resonator tube clamp, then remove the air duct hose and resonator assembly.
  5. Disconnect mass air flow/intake air temperature sensor electrical connector.
  6. Remove mass air flow/intake air temperature from air cleaner case (upper).
    CAUTION: Handle sensor with care.
    • Do not shock it.
    • Do not disassemble it.
    • Do not touch its sensor.
  7. Disconnect transaxle breather hose.
  8. Separate the harness connectors from the air cleaner case.
  9. Remove air cleaner case assembly.
scientia non olet · About LEMON Manuals