Removal and Installation: Removal
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Remove cowl top cover. Refer to Removal and Installation .
- Remove front pillar molding (RH/LH). Refer to Removal and Installation .
- Remove roof side molding. Refer to Removal and Installation .
- Remove inside mirror. Refer to Removal and Installation .
- Remove rain sensor (if equipped). Refer to Removal and Installation .
- Partially lower headlining (front edge). Refer to Exploded View .
- Remove windshield glass using piano wire or power cutting tool (A) and an inflatable pump bag (B).
- Apply protective tape around the windshield glass to protect the painted surface from damage.
- If the windshield glass is to be reused, mark the body and the glass with matching marks.
WARNING: When cutting the glass from the vehicle, always wear safety glasses and heavy gloves to help prevent glass splinters from entering your eyes or cutting your hands.CAUTION:- Be careful not to scratch the glass when removing.
- Do not set or stand glass on its edge. Small chips may develop into cracks.
- Apply a protective tape around the windshield glass to protect the painted surface from damage.