LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 679 (Security Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B2603: Shift Position >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 1 
    1. Shift the selector lever to the P (Park) position.
    2. Turn ignition switch ON and wait 1 second or more.
    3. Check DTC in "Self-Diagnostic Result" mode of "BCM" using CONSULT.

    Is DTC detected?

    YES

    Go to Diagnosis Procedure .

    NO

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 2 
    1. Shift the selector lever to any position other than P (Park) and wait 1 second or more.
    2. Check DTC in "Self-Diagnostic Result" mode of "BCM" using CONSULT.

    Is DTC detected?

    YES

    Go to Diagnosis Procedure .

    NO

    Inspection End.

scientia non olet · About LEMON Manuals