Component Function Check
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Before performing the diagnosis, check that the following is normal.
- Battery saver output/power supply
- Front step lamp bulb
- Foot lamp bulb
- CHECK STEP LAMP OPERATION
CONSULT
- Turn ignition switch ON.
- Select STEP LAMP TEST of BCM (INT LAMP) active test item.
- While operating the test items, check that front step lamp and foot lamp turns ON/OFF.
On
: Step lamp and foot lamp ON
Off
: Step lamp and foot lamp OFF
Is the inspection result normal?
YES
Step lamp circuit is normal.
NO
Refer to Diagnosis Procedure .