Diagnosis Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Vehicle conditions:

Seat belt indicator lamp is ON, passenger air bag indicator lamp is ON or OFF
Passenger seat is unoccupied
Driver seat belt is buckled
Passenger seat belt buckle harness and seat belt buckle switch are OK (buckle passenger seat belt to check if seat belt indicator lamp turns OFF, driver seat belt needs to be buckled)

REPLACE OCS SENSORS
1. Replace the OCS sensors. Refer to Removal and Installation .
2. Perform zero point reset. Refer to Description .
Is symptom still present?

YES

GO TO 2.

NO

Inspection End.
REPLACE PASSENGER SEAT CUSHION FRAME
1. Replace the passenger seat cushion frame. Refer to Seat Cushion .
2. Perform zero point reset. Refer to Description .
Inspection End.