Zero Point Reset: Description

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Zero point reset is an initializing procedure for the OCS (weight) sensors that must be performed using CONSULT when removing and installing passenger seat or servicing the OCS system. If zero point reset is not performed, the initialization is incomplete and OCS may not operate normally.

NOTE:

When reinstalling the passenger seat, the initial value for the OCS sensors may change, and the OCS may not operate normally.
When zero point reset is performed after removal and installation of passenger seat, CONSULT displays "complete".