Component Function Check

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "AUTOMATIC BACK DOOR CONTROL MODULE" using CONSULT.
Select "BK DOOR CL SW" in "DATA MONITOR" mode.
Check that the function operates normally according to the following conditions.

Monitor item	Condition		Status
BK DOOR CL SW	Automatic back door close switch	Pressed	ON
		Released	OFF

Is the inspection result normal?

YES

Automatic back door close switch is OK.

Refer to Diagnosis Procedure .