Component Inspection
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK ENGINE OIL TEMPERATURE SENSOR
- Turn ignition switch OFF.
- Disconnect engine oil temperature sensor harness connector.
- Remove engine oil temperature sensor. Refer to Exploded View .
- Check resistance between engine oil temperature sensor terminals by heating with hot water as shown in the figure.
EOT sensor
Condition
Resistance
Terminal
1
2
Temperature [ deg.C (deg.F)]
20 (68)
2.10 - 2.90 kΩ
50 (122)
0.68 - 1.00 kΩ
90 (194)
0.236 - 0.260 kΩ
Is the inspection result normal?
YES
INSPECTION END
NO
Replace engine oil temperature sensor. Refer to Exploded View .