Removal and Installation: Notes
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- This section describes the procedure for removal/installation of the front timing chain case in vehicle and without removing the oil pan (upper). Remove the engine prior to following this procedure if the engine is to be removed to facilitate other repairs.
- To remove the rear timing chain case, remove the engine from the vehicle. Refer to Removal and Installation (FWD) or Removal and Installation (AWD).
- Refer to Exploded View for Component Location.
- When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.