Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FRONT WASHER MOTOR FUSE
- Turn ignition switch OFF.
- Check that the following fuse is not blown:
Component
Capacity
Fuse No.
Location
Front washer motor
10A
47
IPDM E/R
Is the fuse blown?
YES
Replace the blown fuse after repairing the affected circuit.
NO
GO TO 2 .
- CHECK FRONT WASHER MOTOR POWER SUPPLY
- Disconnect the front washer motor.
- Turn ignition switch ON.
- Check voltage between front washer motor harness connector and ground.
(+)
(-)
Washer switch
Voltage
(Approx.)
Front washer motor
Ground
Connector
Terminal
E226
1
ON
Battery voltage
OFF
0 V
Is the inspection result normal?
YES
Inspection End.
NO
GO TO 3.
- CHECK WASHER SWITCH
Check washer switch. Refer to Component Inspection .
Is the inspection result normal?
YES
Repair harness between fuse and the front washer motor.
NO
Replace washer switch. Refer to Exploded View .