Component Inspection
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK WASHER SWITCH (WIPER AND WASHER SWITCH)
- Turn ignition switch OFF.
- Disconnect combination switch (wiper and washer switch) connector.
- Check continuity between the combination switch (wiper and washer switch) terminals.
Combination switch (wiper and washer switch)
Condition
Continuity
Terminals
1
6
Washer switch ON
Yes
Is the inspection result normal?
YES
Inspection End.
NO
Replace combination switch (wiper and washer switch). Refer to Exploded View .