Calibration Of DECEL G Sensor: Description
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
TCM stores calibration data (inherent characteristic value) of decel G sensor to provide accurate control. Therefore, it is required to perform calibration of decel G sensor after the following work is performed.
- Removing/ installing ABS actuator and electric unit (control unit)
- Replacing ABS actuator and electric unit (control unit)
- Replacement of TCM
- Erasing the calibration data of TCM
Refer to Work Procedure .