LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 581 (Rear Suspension) >> Removal And Installation >> Front Lower Link >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear wheel and tire using power tool. Refer to Adjustment .
  2. Support the rear lower link with a suitable jack.
    WARNING: Place a suitable jack under the outer end of the rear lower link.
    CAUTION: Do not damage the rear lower link with the suitable jack.
  3. Support the rear knuckle with a suitable jack.
    WARNING: Place a suitable jack under the center of the rear knuckle.
    CAUTION: Do not damage the rear knuckle with the suitable jack.
  4. Index mark the adjusting bolt to the rear suspension member.
    GNSLEIA08E-008Courtesy of NISSAN NORTH AMERICA, INC.
  5. Remove the lower shock absorber bolt using power tool. Refer to Exploded View .
  6. Remove the coil spring. Refer to Exploded View .
  7. Remove the front lower link nut and bolt from the rear suspension member using power tool.
  8. Remove the front lower link nut and bolt from the rear knuckle using power tool.
  9. Remove the front lower link cover.
  10. Remove the front lower link.
scientia non olet · About LEMON Manuals