Component Function Check
WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Signal Tech II Tool [- (J-50190)] can be used to test the remote keyless entry keyfob relative signal strength. Refer to the Signal Tech II User Guide for additional information.
- CHECK FUNCTION
With CONSULT
Check remote keyless entry receiver by pressing the keyfob lock and unlock buttons then monitoring KEYLESS LOCK, KEYLESS UNLOCK in Data Monitor mode with CONSULT.
Monitor item
Condition
KEYLESS LOCK
LOCK
: ON
UNLOCK
: OFF
KEYLESS UNLOCK
LOCK
: OFF
UNLOCK
: ON
Is the inspection result normal?
YES
Keyfob is OK.
NO
Refer to Diagnosis Procedure .