DTC Diagnosis Procedure

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.

The following functions are available when having and carrying electronic ID.

Door lock/unlock
Panic alarm

Remote control entry function and panic alarm function are available when operating the remote buttons.

NOTE: The Signal Tech II Tool [- (J-50190)] can be used to test the remote keyless entry keyfob relative signal strength. Refer to the Signal Tech II User Guide for additional information.

CHECK KEYFOB BATTERY
Check by connecting a resistance (approximately 300 Ohm) so that the current value becomes about 10 mA.

Courtesy of NISSAN NORTH AMERICA, INC.

Standard

: Approx. 2.5 - 3.0 V

Is the measurement value within specification?

YES

GO TO 2.

NO

Replace keyfob battery.
CHECK KEYFOB FUNCTION
Check keyfob function using Signal Tech II Tool [- (J-50190)] or Remote Keyless Entry Tester [- (J-43241)] (shown below).

Courtesy of NISSAN NORTH AMERICA, INC.

Does the test pass?

YES

Keyfob is OK.

NO

Replace keyfob.