LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 502 (Engine Control System (DTC/Circuit Diagnosis) (1 Of 3)) >> DTC/Circuit Diagnosis >> DTC P0113: IAT Sensor >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK INTAKE AIR TEMPERATURE SENSOR 
    1. Turn ignition switch OFF.
    2. Disconnect mass air flow sensor harness connector.
    3. Check resistance between mass air flow sensor terminals as per the following.
      GNSJPBIA5410Z-410Courtesy of NISSAN NORTH AMERICA, INC.

      Mass air flow sensor

      Condition

      Resistance (kOhm)

      +

      -

      Terminals

      5

      6

      Temperature [ deg.C (deg.F)]

      25 (77)

      1.800 - 2.200

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace mass air flow sensor (with intake air temperature sensor). Refer to Exploded View .