LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 466 (Automatic Transmission (Re5R05A)) >> Removal And Installation >> Fluid Cooler System >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2019 Nissan NV3500 HD, 2019 Nissan NV2500 HD, and 2019 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.
  1. Remove front grille. Refer to Exploded View .
  2. Remove air guide seal (LH/RH).
  3. Remove A/T fluid cooler hoses from A/T fluid cooler.
  4. Remove A/T fluid cooler bolts.
  5. Remove A/T fluid cooler from the vehicle.
    CAUTION: Be careful not to damage A/T fluid cooler core.
  6. Remove front under cover using power tool. Refer to Exploded View - Front Bumper .
  7. Remove A/T control cable and A/T control cable bracket from A/T assembly. Refer to Exploded View .
  8. Remove A/T fluid cooler hoses and A/T fluid cooler tubes.
    CAUTION:
    • Do not reuse copper sealing washers.
    • Be careful not to bend A/T fluid cooler tubes.
scientia non olet · About LEMON Manuals