LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Automatic Transaxle (2 Of 2)) >> Removal And Installation >> CVT Oil Warmer System >> CVT Fluid Cooler Hose >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.
  1. Remove front under cover. Refer to Removal and Installation .
  2. Remove engine room cover. Refer to Removal and Installation .
  3. Remove the front air duct and air cleaner case assembly. Refer to Removal and Installation .
  4. Release hose clamp, then remove CVT fluid cooler hose A and B from CVT oil warmer and radiator.
    CAUTION: Do not reuse hose clamps.
scientia non olet · About LEMON Manuals