DTC Confirmation Procedure
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Turn ignition switch ON.
- Operate automatic back door motion activated back door sensor.
- Check "Self Diagnostic Result" mode of "AUTO BACK DOOR" using CONSULT.
Is DTC detected?
YES
Refer to Diagnosis Procedure - Early Production or Diagnosis Procedure - Late Production .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: Inspection End.