LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 401 (Door & Lock (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B242C: Motion Activated Back Door Control Module >> Diagnosis Procedure - Early Production

Diagnosis Procedure - Early Production

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK SELF DIAGNOSTIC RESULT 
    1. Turn ignition switch ON.
    2. Select "Self Diagnostic Result" mode of "AUTO BACK DOOR" using CONSULT.

    What is the display history of DTC "B242C"?

    "CRNT"

    GO TO 2.

    "PAST"

    GO TO 3.

  2. CHECK INTERMITTENT INCIDENT 
    1. Check intermittent incident. Refer to Intermittent Incident .
    2. Select "Self Diagnostic Result" mode of "AUTO BACK DOOR" using CONSULT.

    Is DTC "B242C" detected?

    YES

    GO TO 4.

    NO

    Inspection End.

  3. ERASE DTC 
    1. Turn ignition switch ON.
    2. Select "Self Diagnostic Result" mode of "AUTO BACK DOOR" using CONSULT.
    3. Erase DTC, and then repeat "DTC CONFIRMATION PROCEDURE". Refer to DTC Description .

    Is DTC "B242C" detected?

    YES

    GO TO 4.

    NO

    Inspection End.

  4. REPLACE MOTION ACTIVATED BACK DOOR CONTROL UNIT 
    1. Turn ignition switch OFF.
    2. Replace motion activated back door control unit. Refer to Removal and Installation .
    3. Turn ignition switch ON.
    4. Erase DTC, and then repeat "DTC CONFIRMATION PROCEDURE". Refer to DTC Description .

    Is DTC "B242C" detected?

    YES

    Replace automatic back door control unit. Refer to Removal and Installation .

    NO

    Inspection End.

scientia non olet · About LEMON Manuals