LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 351 (Engine Control System (DTC/Circuit Diagnosis) (16 Of 17)) >> DTC/Circuit Diagnosis >> Electronic Controlled Engine Mount >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK OVERALL FUNCTION 
    1. Start engine and warm it up to normal operating temperature.
    2. Shift selector position is D while depressing the brake pedal and parking brake pedal.
    3. Disconnect electronic controlled engine mount control solenoid valve harness connector.
    4. Check that body vibration increases compared to the condition of step 2 above (with vehicle stopped).

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Diagnosis Procedure .

scientia non olet · About LEMON Manuals