LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Brake System) >> Removal And Installation >> Brake Pedal >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove instrument lower panel LH. Refer to Removal and Installation .
  2. Remove lower knee protector. Refer to Exploded View .
  3. Remove accelerator pedal. Refer to Removal and Installation .
  4. Disconnect harness connectors from stop lamp switch and brake pedal position switch.
  5. Remove stop lamp switch and brake pedal position switch from brake pedal.
  6. Remove snap pin (1) and clevis pin (2) from brake pedal.
    CAUTION: Do not reuse the clevis pin.
    GNSJPFIA0019Z-019Courtesy of NISSAN NORTH AMERICA, INC.
  7. Disconnect brake booster clevis from brake pedal.
  8. Disconnect steering column assembly pinch bolt and position steering column assembly aside to gain access to brake pedal. Refer to Exploded View .
  9. Remove brake pedal assembly nuts.
    NOTE: Remove top brake pedal assembly nut first.
  10. Remove harness clips from brake pedal.
  11. Remove brake pedal.
scientia non olet · About LEMON Manuals