Removal and Installation: Removal
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Drain brake fluid. Refer to Drain and Refill .
- Remove air cleaner assembly and air ducts. Refer to Removal and Installation .
- Disconnect harness connector from brake fluid level switch.
- Remove brake fluid level switch.
- Separate brake pipes from master cylinder using a flare nut wrench.CAUTION: Do not scratch the flare nut or the brake pipe.
- Remove master cylinder nuts.
- Remove master cylinder.CAUTION: Do not depress the brake pedal after the master cylinder assembly is removed.
- Remove and discard O-ring from the master cylinder.CAUTION: Do not reuse O-ring.