LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Front Final Drive (Ma210)) >> Removal And Installation >> Carrier Cover >> Removal and Installation >> Installation

Removal and Installation: Installation

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the carrier cover and gasket to the gear carrier. Tighten the bolts to the specified torque. Refer to Exploded View .
  2. Install the front final drive assembly. Refer to Removal and Installation .
    CAUTION: Do not reuse gasket.
  3. Fill the front final drive assembly with recommended differential gear oil. Refer to Refilling .
scientia non olet · About LEMON Manuals