Front Differential Gear Oil: Refilling
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- Remove filler plug (1) and gasket. Then fill with new gear oil until oil level (A) reaches the specified level near filler plug mounting hole.CAUTION: Do not overfill front final drive.
Oil grade and viscosity
: Refer to Cummins 5.0L Engine : Fluids and Lubricants or VK56VD Gasoline Engine : Fluids and Lubricants .
Standard Oil capacity
: Refer to General Specification .
- Install a gasket on filler plug, and install it to final drive assembly.CAUTION: Do not reuse gasket.
- Tighten filler plug to the specified torque. Refer to Exploded View .