LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 225 (Heater & Air Conditioning System) >> Removal And Installation >> Heating And Cooling Unit Assembly >> Expansion Valve >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Discharge refrigerant. Refer to Recycle Refrigerant .
  2. Disconnect high-pressure pipe from internal heat exchanger. Refer to Exploded View .
    CAUTION: Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
  3. Disconnect internal heat exchanger from expansion valve. Refer to Exploded View .
    CAUTION: Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
  4. Remove screws, then remove expansion valve.