LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 225 (Heater & Air Conditioning System) >> Removal And Installation >> Cooler Pipe And Hose >> Low-Pressure Pipe >> Removal and Installation - CUMMINS 5.0L >> Removal

Removal and Installation - CUMMINS 5.0L: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove wheel and tire using power tools. Refer to Removal and Installation .
  2. Remove fender protector. Refer to Removal and Installation - Front Fender Protector .
  3. Discharge refrigerant. Refer to Recycle Refrigerant .
  4. Remove air duct. Refer to Exploded View .
  5. Remove bolt from cowl top extension, then remove bolt from dash panel.
  6. Remove bolt and disconnect low-pressure pipe from expansion valve.
    CAUTION: Cap or wrap the joint of the low-pressure pipe with suitable material such as vinyl tape to avoid the entry of air.
  7. Remove bolt and disconnect low-pressure pipe from low-pressure flexible hose.
    CAUTION: Cap or wrap the joint of the low-pressure pipe with suitable material such as vinyl tape to avoid the entry of air.
scientia non olet · About LEMON Manuals