LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 225 (Heater & Air Conditioning System) >> Removal And Installation >> Compressor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Discharge refrigerant. Refer to Recycle Refrigerant .
  2. Remove drive belt. Refer to Removal and Installation (VK56VD) or Removal and Installation - Drive Belt (CUMMINS 5.0L).
  3. Remove front wheel and tire (LH). Refer to Removal and Installation .
  4. Remove front fender protector (LH). Refer to Removal and Installation - Front Fender Protector .
  5. Disconnect harness connector from compressor.
  6. Disconnect high-pressure flexible hose and low-pressure flexible hose from compressor. Refer to Exploded View .
    CAUTION: Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
  7. Remove compressor bolts and compressor.
scientia non olet · About LEMON Manuals