LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Instrument Panel) >> Removal And Installation >> Center Console Assembly >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Be careful not to scratch center console finishers (LH/RH) or other parts.
  • Be careful not to damage center console assembly.
  • Be careful not to damage Center Console Bin. If bin is damaged, replace Center Console.
  1. Remove shift selector handle. Refer to Exploded View .
  2. Remove shift selector finisher.
  3. Remove center console finishers (LH/RH).
  4. Release clips using a suitable tool and remove rear console finisher.
  5. Remove the center console screws.
  6. Disconnect the harness connectors and remove the center console assembly.
  7. If necessary, remove screws and remove shift selector indicator lock.
  8. If necessary, remove screws and remove shift selector indicator.
  9. If necessary, remove screws and remove rear center ventilator duct.
  10. If necessary, remove screws and remove center console bin lid.
  11. If necessary, remove power socket. Refer to Removal and Installation .
  12. If necessary, remove rear USB port charge (if quipped). Refer to Removal and Installation.
scientia non olet · About LEMON Manuals