Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DTC PRIORITY
- Turn ignition switch ON.
- Connect CONSULT and check for "ENGINE" diagnostic trouble codes.
- Check for DTC P0507-00 being current on the CONSULT screen.
Is DTC P0507-00 detected as current?
YES
GO TO 2.
NO
Refer to Intermittent Incident .
- CHECK DTC PRIORITY
- Turn ignition switch ON.
- Connect CONSULT and check for "ENGINE" diagnostic trouble codes.
- Check for DTC P0501-00 being current on the CONSULT screen.
Is applicable DTC detected?
YES
Refer to DTC Index .
NO
GO TO 3 .
- CHECK DTC PRIORITY
- Turn ignition switch ON.
- Connect CONSULT and check for "ENGINE" diagnostic trouble codes.
- Check for current or past DTCs related to the fuel system, crankshaft position sensor or camshaft position sensor on the CONSULT screen.
Is applicable DTC detected?
YES
Refer to DTC Index .
NO
GO TO 4 .
- CHECK ENGINE RPM
- Start the engine.
- Connect CONSULT and compare engine RPM in Data Monitor to mechanical tachometer or to the instrument cluster tachometer.
Is RPM reading correct?
YES
GO TO 5 .
NO
Refer to Diagnosis Procedure and Diagnosis Procedure .
- CHECK FOR ALTERNATE FUEL SOURCE
- Turn ignition switch OFF.
- Check for alternate fuel source:
- Check the oil contamination in the intake piping.
- Check for malfunctioning cold weather starting aids.
- Check for malfunctioning aftermarket devices.
Alternate fuel source found?
YES
Repair or replace error-detected parts.
NO
Refer to appropriate engine performance troubleshooting tree.