DTC Detection Logic
WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
Detects when the air flow fails to pass through the compressor when the compressor bypass valve commanded position is "default" or "closed".
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|
P22CD-00 |
Compressor bypass valve |
Diagnosis condition |
This diagnostic runs when the ignition switch is ON or when the engine is running. |
|
Signal (terminal) |
Compressor bypass valve |
||
|
Threshold |
Maximum pressure ratio observed across the high pressure compressor after the enable conditions are true for 500 msec is < 1.1 (ratio). |
||
|
Diagnosis delay time |
- |
||