LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (5 Of 6)) >> DTC/Circuit Diagnosis >> DTC P229F-00: NOX Sensor 2 >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

After treatment outlet NOx sensor in-range but reading inappropriately high.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P229F-00

NOX SENSOR B1 SEN 2

Diagnosis condition

This diagnostic runs when the SCR outlet temperature is above 200°C (392°F), and the engine is in a motoring (non-fueling) condition.

Signal (terminal)

NOx sensor signal

Threshold

The ECM detected the outlet NOx sensor was not reading zero while in a motoring (non-fueling) condition.

Diagnosis delay time

-